Cut throat razor / strop and Shaving brush tips.

A basic introduction to cut throat razor and shaving brush care.
The Razor.
Stainless steel razors do not need a special treatment but all razors should be washed with clean water after use and then carefully dried. If you do not intend to use the razor for a long time, it is recommended to lightly oil it.
The Shave.
When using a razor for the first time, start with the easy and soft parts of the face. Hold the opened razor with thumb and three fingers so that the opened handle shows away from the face.
Prepare the skin with a good shaving soap. With an angle of approximately 30 degrees, first shave down with the razor then shave up. If you hold the razor too flat it will tear the stubble.
Always shave in the direction of the cutting edge, never laterally.
If the razor is damaged by falling on a hard surface, it should be professionally attended to before using again as the fine edge may need regrinding.
Shaving brushes.
Once you have finished shaving, rinse your shaving brush thoroughly and gently flick the brush to rid excess water to avoid rot and mildew.

---

Orignal From: Cut throat razor / strop and Shaving brush tips.